2011/05/07

HobbyKing Online R/C Hobby Store : OrangeRx Spektrum DSM2 9Ch 2.4Ghz Receiver , PRE-ORDER

Media_httpwwwhobbykin_rbpvu

OrangeRx Spektrum DSM2 9Ch 2.4Ghz Receiver , PRE-ORDER

Price: $24.95

Compatible with all Spektrum DSM2 Air transmitters.
The new range of OrangeRx receivers are built using original components and MCUs and with state of the art SMT automation to ensure a quality product each and every time. All OrangeRx receivers are QC tested before leaving the factory.
The OrangeRx will work with ANY Aircraft Spektrum DSM2 2.4Ghz transmitter.
The OrangeRx 9ch is only 14g in weight and 46x30x14mm in size with case, Great for medium/small planes & helis, right up to large scale models.

Key features.
Super light weight 14g grams with case.
Compatible with DSM2 aircraft radio and module systems.
9 Channels.
Compact design 38mm x 26mm x 9mm, with case 46 x 30.7 x 14mm.
Single 195mm antenna for mounting in almost any location.
Input voltage: 3.7~9.6V.
2 x Satellite port included.

Warranty.
12 Month replacement guarantee!

Included.
OrangeRx-9 DSM2 Compatible receiver

NOTE
i) This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. The Spektrum brand is a trademark of Horizon Hobbies USA.
ii) Price of this receiver may fluctuate (up or down) due to cost of electronic components.
iii) This is not an underground manufactured fake Spektrum receiver. OrangeRx quality is guaranteed.

* Stock ETA end of May
**These are NOT the same as other units sold in China. We have produced these units entirely in-house. Customers will notice our PCB layout and components are not the same as other copies.
***OrangeRx are guaranteed to hold bind and work at full range.

2011/04/14

HobbyKing Online R/C Hobby Store : HobbyKing 3S 4 Channel Balance Charger

Media_httpwwwhobbykin_iglsn

HobbyKing 3S 4 Channel Balance Charger

Price: $48.36

The HK-3x4 is the perfect balance charger for anyone who uses 3S Lipoly batteries frequently. The large, easy to read, back lit LCD provides up to the minute charging information for each cell on uo to 4 packs all on the same screen, no need to scroll between screens to see the voltage for each cell during charging.

Specs:
Max Total Power: 200w
Max Total Amps: 16Amp
Balance precision: 10mv
Input Voltage 13.5~24v DC
Charge Current: 0.5~4.0Amp (each Battery)
Charging Port: 3S Lipoly only
Fan Cooled: Yes
Input plug: 4mm Bannan plug

HobbyKing Online R/C Hobby Store : Super Cub EP 1870mm Balsa/Ply (ARF)

Media_httpwwwhobbykin_rjkgg

Super Cub EP 1870mm Balsa/Ply (ARF)

Price: $99.99

In effect, an "engined up" J3 Cub, the Super Cub was so popular that Piper were still building this aircraft right up until 1981, after which they sold the manufacturing rights, by which time they had sold 2,650 examples. The engine was uprated to 150hp, giving the Super Cub a top speed of 130mph, this extra power also made the Super Cub ideal for glider towing.

The Hobbyking Super Cub Cub with its unique colour scheme is more than just a looker, it is a high quality, scale model that boasts, working bungee under-carriage, a magnetic Pilots door for easy battery access, flaps and a 2pc easy removable wing for transport.

This model is no IC conversion, it is a large, purpose built, electric powered, high quality model that will give hours of flying pleasure and with the reccomended set up, excellent flight times, are guaranteed, even if your model becomes the flying club glider tug!

2011/04/01

HobbyKingLive's Photos - HobbyKing Helicopter Pitch Gauge Kit

Media_httpa4sphotosak_pdffg

HobbyKing Helicopter Pitch Gauge Kit


Price: $4.99

The HobbyKing helicopter pitch gauge is made from ultra rigid Fiber Glass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!

Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm

HobbyKing Online R/C Hobby Store : HobbyKing Helicopter Pitch Gauge Kit

2011/03/28

HobbyKing Online R/C Hobby Store : DragonFly EDF Balsa/Ply Park Jet (ARF)

Media_httpwwwhobbykin_lilya

DragonFly EDF Balsa/Ply Park Jet (ARF)


Price: 124.15

The DragonFly EDF Park jet is built from balsa and ply wood and is perfect for anyone looking for an EDF model that is a little different to the rest. With a great power to weight ratio and low wing loading the DragonFly EDF Park jet a the perfect model for anyone looking to get in to the world of jet flying. You can enjoy low high speed passes and aerobatic maneuvers yet bring the model in for slow and docile landings.

This quality model features strong balsa and ply wood construction with a full balsa sheeted fuselage. The wings can be quickly removed for easy transport and feature a carbon fiber spar. The canopy is locked in place with a quick release latch that ensures it will remain secure in flight. A generous cockpit has been incorporated in the design making installing your choice of electronics a breeze.

The included 3600kv motor is rated to 3s and provided up to 375watts of power. You will require a 30amp ESC, 4 x 9gram servos, a 1800mAh to 2200mAh 3s1P lipoly battery and your own transmitter and receiver (Tx/Rx) to complete this model.

If your looking for balsa/ply model with great performance and easy flight characteristics then the DragonFly EDF Park jet is for you. A full set of quality hardware has been included along with an optional set of landing gear.

Specs:
Wing Span: 920mm (36in)
Length: 830mm (32.5in)
Wing Area: 14.5sq.dm
Flying weight: 790g
Motor: 2830-3600kv Brushless outrunner (Included)
EDF: 68mm (Included)
ESC: 30A (required)
Servo: 4 x 9g (required)
Battery: 1800~2200mAh 3s1P

Required:
ESC: 30A
Servo: 4 x 9g
Battery: 1800~2200mAh 3s1P
Radio: 4 Channel Tx/Rx

2011/03/22

HobbyKing Online R/C Hobby Store : CL-415 Canadair 1390mm (ARF)

Media_httpwwwhobbykin_wglal

CL-415 Canadair 1390mm (ARF)


Price: $40.30

The CL-415 is the only aircraft in the world purpose built as a firefighter, it is literally, a waterbomber. This big model Seaplane can be flown either off water or at your favourite grass flying feild, yet despite its size, this kit can be completed for very little cost.

The model is very light, meaning little power is needed to get it "unstuck" and into the air, it also features a water steering paddle, connected to the rudder, for steering the model back to shore. If you are not flying from water, simply un-screw the water steering rudder and hand-launch, the Canadairs excellent manners mean a grass landing is a breeze. The kit features a very comprehensive hardware kit, including servo extension leads, 8x3.8SF props, spinners, glue and tools!

Specifications:
Construction: Foam/Ply
Wing Span: 1390mm
Length: 730mm
Dry Weight: 710g
4 Channel (aileron, elevator, throttle, rudder)

Requires:
Your own 4Ch RX/TX
2 x 24/2210 1400-1500kv Motors
2 x 20A ESC
4 x 9g Servo
2200mAh 3s Lipoly Battery

Flite Test - Edge 540 - REVIEW

2011/03/21

HobbyKing Online R/C Hobby Store : Turnigy 2650mAh 3S 1C LLF Tx Pack (Futaba/JR)

Media_httpwwwhobbykin_eeecc

Turnigy 2650mAh 3S 1C LLF Tx Pack (Futaba/JR)


Price: $12.79

The Turnigy 2650mAh Transmitter pack fits snuggly into any Futaba or Jr radio which uses a 4x4 AA cell battery configuration (see image). It includes discharge plugs for both JR, Spektrum plus other radios. Its built with a low C-rate Long Life LiCo Formular which isnt like a standard LiPo. It retains voltage for months on end without need for a storage charge so you can store your radio and fly once a month and not have to worry about discharging or recharging your pack.

With a capacity of 2650mAh this lipoly replacement for your old NiCD or NiMH will last four to five times longer. Probably the best advantage with a lipoly transmitter battery is that it will give a true voltage reading from start to finish which means you can say goodbye to the days where you thought your Transmitter was fully charged at home, only to find the voltage drop off rapidly when at the field.

Spec.
Capacity: 2650mAh
Voltage: 11.1v
Constant discharge: 1C
Burst discharge: N/A
Weight: 157g
Size: 98x30x27mm
Plugs: Futaba, JR/Spektrum
Balance Plug: JST-XH

HobbyKingLive's Photos - 300A ESC

Media_httpa7sphotosak_ggfpb

New 300A is going to manufacture!
The large case will be modify/change.

2011/03/17

HobbyKing Online R/C Hobby Store : HobbyKing HK6DF 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2)

Media_httpwwwhobbykin_bbdil

HobbyKing HK6DF 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2)


Price: $28.41

The HK6DF is an value for money, entry level 6 channel transmitter, ideal for many PNF & ARF Models that require 6ch operation. The HK6DF has a retract switch and proportional flap dial in easy reach, the transmitter also features elevon mixing and servo reversing.

Key Features:
6-channel 2.4GHz transmitter with servo reversing & elevon mixing.
Easy to use control for basic models.
FHSS 2.4ghz Technology
Includes 6-channel receiver
Mode 2 (THROTTLE ON THE LEFT)

Included:
1 x 2.4Ghz transmitter
1 x 2.4Ghz Receiver
1 x Bind Plug.

Note: Only HK-6DF receiver is comptible with HK-6DF transmitter.

2011/03/14

HobbyKing Online R/C Hobby Store : Air Operated Retract Kit 2-Way Valve (No Struts)

Media_httpwwwhobbykin_kkgdz

Air Operated Retract Kit 2-Way Valve (No Struts)


Price: $117

This version of our popular retract system comes without struts for those wanting to use different Oleo legs to suit their model, please note that the Oleo pin fitment is 5mm. High quality components including a pressure guage are included, this is a complete kit, meaning that no other components will need to be sourced other than legs.

Total weight of system is 360g.

2011/03/11

Flite Test - Combat - FLITE TIP

Aerial combat is very popular in the world of RC flight.
Watch as Josh Bixler and Anthony Hand (Hobby King President) duke it out to the death!

2011/03/08

HobbyKing Online R/C Hobby Store : Kyosho AutoKite 2.4Ghz - Red (RTF)

Media_httpwwwhobbykin_olwcf

Kyosho AutoKite 2.4Ghz - Red (RTF)


Price: $49.4

The Kyosho AutoKite is a blast for indoor flying. Built from ultra light foam the AutoKite can be flown in amazingly small places. If your looking to get in to indoor flying then the AutoKite is the perfect model and comes with everything you need right out of the box.

The included battery charger doubles as a display stand and charges the provided 3.7v 70mAh 1S lipo in no time. The Kyosho Perfex 2.4ghz radio system offers digital trims and a rock solid radio link. Up to 26 AutoKites can be flown at once so you can enjoy hassle free flying with friends.

The Kyosho AutoKite was an instant hit at the HobbyKing office. We had a blast flying this model in the office car park. Tight figure 8s and even loops were a breeze. If your looking for something a little out of the ordinary for indoor flying then you cant go past an AutoKite!

Specs:
Length: 393mm
Width: 415mm
Weight: 33g (Approx.)
Motor: M8 Coreless motor
Battery: 3.7v 70mAh 1S Lithium Polymer
Wing Area: 6.6dm2
Wing Load: 5g/dm2
Wing Type: Kite
R/C System: 3-channel, 2.4GHz Perfex KT-17 R/C system
Propeller: D130mm × P70m
Scale: 1/21

Required:
8 x AA Batteries (4 for the Transmitter and 4 for the Charger)

Flite Test - EP Pitts - REVIEW

2011/03/07

Mini L-39 EDF Jet

Mini L-39 EDF Fighter Jet EPO Plug-n-Fly

An excellent parkflyer sized EDF foamie made from well moulded and crash resistant (EPO) foam.
The L-39 EDF jet comes plug and fly ready right out of the box and will take you around 45 minutes to set up. Included is a 20A ESC and small yet powerful 50mm brushless ducted fan system, plus all servos are pre installed so all you only need to add is your own battery & receiver to complete this model.

Specification:
Wingspan: 488mm
Length: 718mm
Flying Weight: 360g
Motor: Powerful brushless outrunner
ESC: 20A
Servo: 3 x 8g
EDF: 50mm
Battery: 850mah 3S 11.1V 20C (Not included)

Required:
Your own Tx & RX
Battery: 850mah 3S 11.1V 20C

2011/02/09

Balancing Your Plane - FLITE TIP

HobbyKing Online R/C Hobby Store : HobbyKing Quadcopter Frame V1

PRODUCT ID: Quadcopter
RATED:
HobbyKing Quadcopter Frame V1
HobbyKing Quadcopter Frame V1

Built from strong yet light weight Ply wood and glass fiber materials the HobbyKing Quadcopter frame provides the perfect test bed or starting point for any Quadcopter enthusiast. The HobbyKing Quadcopter frame comes with the main components pre-assembled right out of the box. The interlocking parts make assembling the entire frame easy. Light weight nylon nuts, bolts and spacers have been included to keep the flying weight down. The Camera tilt mechanism also includes a vibration dampening system to combat rolling shutter effects.

Height: 200mm
Witdh: 550mm
Weight: 195gram (No electonics)
Skid width: 256mm
Ply Wood: 3mm

Clearance:
Underside of main frame: 115mm
Underside of Camera support: 35mm